Joined in 2023 
82 
63 About this deal
A rolled edge is when the fine sharp point of the blade gets bent, or “rolled” to one side. It may not even be noticeable at a glance but if you touch the sides of the blade edge you will feel a thin “wire” or “lip” of metal off to the side, right at the tip. Sharpening the surfaces of a Fiskars axe and getting a fine-grit Smith Diamond sharpener is a good option. The combination of bench stone, multiple layers of micron-sized monocrystalline diamonds, and a unique sharpening surface with an overlapping oval hole pattern make this sharpener up to the mark. When you are examining the edge you should see the newly sharpened bevel as brighter steel. Make sure it is a constant depth/width. Any narrow or non-shiny areas should be sharpened more. The easiest way is to simply wipe down the head with WD-40 after using the axe. It will both clean away dirt and residue and provide a light oiling at the same time.
If you don’t have leather you can use denim, paper, or honestly even just drag it across a flat wood surface. The sharpener seemed to work okay on the Estwing, but not on the other two. They have a different edge profile from a Fiskars axe. They could be tweaked to match the edge of the sharpener, but I don’t plan on using them with it (so I didn’t bother). And Even for the Estwing which worked it required a bit of a different technique. WD-40 is a common solution, but gun oil, boiled linseed oil, and other solutions work great. I have a full article on every way I know to prevent rust on an axe. One method even includes bacon.Sharpening your favourite cutting tools methodically can take up to an hour. Instead, someone might simply polish his axe blades using this Fiskars sharpener. There’s no struggle with the ceramic roller because it sharpens at an exact 30-degree angle. Moreover, the user’s fingertips will never be in danger in this process. But still, a user can gain good knowledge abouthow to use the Fiskars axe sharpener. Technique Three: Smith Diamond Flat Sharpeners
While most of a Fiskars axe is fairly indestructible, the cutting edge will dull with use and can chip or roll. It’s a fairly common criticism of Fiskars. The 30-degree flat grind edge is sharp but more delicate than a convex grind. Combined with a bit softer steel and you are going to have to do some sharpening. File with the single cut side. Axe files will often have a single cut and double cut side – the single cut (straight lines) will be smoother and remove less material per stroke. The double cut side will criss-cross and is for aggressive material removal. If rust does start to form in those grooves (or anywhere on the head), I’ve found steel wool or a wire brush are the best way to get in there and clean it out. It’s not a big deal, but there is a chance these metal bits can immediately cause damage or dulling again if they aren’t removed. So while I encourage people to learn to sharpen “properly”, sometimes it’s hard to beat a 60-second method with no learning curve.
Fiskars Axe And Knife Sharpener - Pros
Clean away any dirt or wood fibers from the surface of the axe head, as it will be full of moisture. You can also use the Fiskars axe sharpener, which is a simple ceramic pull-through sharpener. It can’t deliver as clean an edge as a stone, but I was quite surprised by how good an edge it can produce. It’s super fast and it’s really easy to use. So after describing all the best ways to care for a Fiskars axe it’s time for me to confess – I often don’t care for my Fiskars axes as well as I should. The Fiskars machining process produces a series of fine grooves running along the blade that is exposed once the coating starts to wear off. These grooves can be a moisture and rust trap if not cleaned regularly and protected. Oil the head to stop rust The Fiskars sharpener is an incredibly versatile tool because it can be used to sharpen both an axe and a knife. In addition, the Fiskars knife and axe sharpener are extremely simple to use.
Great Deal 
New Comment